Vehicle Safety Questions Explained For Chinese Students

 

QUESTION- Show me how you would check that the direction indicators are correctlyfunctioning.

ANSWER- Making use of the indicators or hazard warning switch and verify performing of all indicators. (may do switch ignition on, remind not to start engine)

 

Question- Tell me how you would verify that the brakes are working before beginning a journey.

ANSWER- Brakes should not feel spongy or slack. Brakes ought to be tested as you set off. Vehicle must not pull to one side.

 

QUESTION- Determine in which the windscreen washer reservoir is and tell me how you would verify the windscreen washer quantity.

ANSWER- Establish reservoir and clarify how to verify quantity.

 

QUESTION- Display to me how you would examine that the brake lgts are working on this car. (I can help you, if you do switch the ignition on, please don’t start the engine)

ANSWER- Work brake pedal, utilize reflections in home windows, garage doors, and so on, or ask someone to help. (may want activate ignition on, prompt not to start off engine)

 

QUESTION- Show me / describe how you would verify that the power assisted steering is workingprior to starting a journey.

ANSWER- If the steering becomes heavy the system may not be working properly. Before beginning a voyage two simple assessments can be made. Gentle pressure on the steering wheelcircle, maintained whilst the engine is started, should result in a small but noticeable movement as the mechanism begins to operate. Alternatively turning the steering whee just soon after moving off could give an rapid indication that the power assistance is functioning.

 

QUESTION- Inform me wherever you would uncover the facts for the encouraged tyre pressures for this car and how tyre pressures should be checked.

ANSWER- Manufacturer’s guide, use a dependable pressure gauge, check and alter pressures once tyres are cold, don’t mostly they forget spare tyre, remember to refit valve caps.

 

QUESTION- Display to me how you would examine the car parking brake (handbrake) for extreme wear, ensure you keep safe management of the vehicle

ANSWER- Apply footbrake firmly. Show by applying parking brake (handbrake) so that once it is completely utilized it secures itself, and is not at the end of the working travel.

 

QUESTION- Identify where the windscreen washer reservoir is and inform me how you would examine the windscreen washer degree. Establish reservoir and clarify how to check degree.

ANSWER – Open the bonnet, identify in which you would examine the engine oil degree and tell me how you would check that the engine has sufficient oil. Establish dipstick / oil level indicator, explain check of oil level against the minimum/optimum markers.

 

QUESTION- Tell me exactly where you would discover the data for the suggested tyre pressures for this car and how tyre pressures should be checked.

ANSWER- Manufacturer’s guide, use a dependable pressure gauge, examine and modify pressures once tyres are cold, don’t mostly they forget spare tyre, remember to refit valve caps.

 

QUESTION- Open the bonnet, determine the place you would check the engine coolant stage and inform me how you would examine that the engine has the correct stage.

ANSWER- Identify higher/low degree markings on header container where fitted or radiator filler cap, and explain how to top until correct degree.

 

QUESTION- Inform me how you guarantee your head restraint is accurately adjusted so it offers the very best protection in the occasion of a crash

ANSWER- The head restraint ought to be adjusted so the rigid component of the head restraint is at least as high as the eye or top of the ears, and as close to the rear off of the head as is comfortable. N.B. Some restraints might not be adjustable

 

QUESTION- Open the bonnet, identify in which the brake fluid reservoir is and tell me how you would examine that you possess a safe stage of hydraulic brake fluid.

ANSWER-identify reservoir, check stage against high/low markings.

 

Question- Tell me how you would examine the tyres to guarantee that they possess enough tread depth and that their general condition is legal to use on the road.

Reply – No cuts and bulges, 1.6mm of tread depth throughout the central ¾ of the breadth of the tyre and around the entire outer circumference.

 

QUESTION- Display to me how you would check that the horn is working (off roads only).

ANSWER – Examination is carried out by employing control turn on ignition if required).

 

QUESTION- Inform me how you would check the tyres to ensure that they possess enough tread depth and that their basic condition is safe to use on the road.

ANSWER- No cuts and bulges, 1.6mm of tread depth across  the centrall ¾ of the breadth of the tyre and around the whole outer circumference.

 

QUESTION- Inform me how you would verify that the brakes are

functioning just before beginning a journey.

ANSWER -Brakes must not really feel spongy or slack. Brakes should be examined as you set off. Vehicle must not drag to one side.

 

QUESTION- Display to me how you would clear the windscreen employing the windscreen washer and wipers

ANSWER- Run control to clean and wipe windscreen (switch ignition on if vital)

 

QUESTION- Tell me how you would examine that the headlights & tail lgts are functioning. (No do exit automobile)

ANSWER- Explanation: Work button (turn on ignition if vital), then walk the perimeter of car. (As this is a “Inform Me” question, there is no do physically examine the lights.)

 

QUESTION- Show me how you would set the demister controls to crystal clear all the windows effectively, this should involve both forward and rear screens

ANSWER -Set all appropriate controls which includes; fan, temperatures, air direction / source and heated display to crystal clear windscreen and car windows. Engine does not have to be started for this demonstration

 

Query -Show me how you would switch on the rear fog light and describe once you would use it/them. (No need to exit vehicle)

ANSWER -Operate button turn on dipped headlights and ignition if vital). Verify alerting light is on. Describe use.

 

QUESTION- Tell me how you would comprehend if there was a trouble with your anti lock braking system A.B.S

ANSWER- Forewarning light should illuminate if there is a fault with the anti lck braking system

 

Question- Display to me how you would examine that the brake lgts are working on this car. (I can support you, if you want switch the ignition on, please don’t start out the engine)

ANSWER – Function brake pedal, bring into play reflections in windows, storage doorways, etc, or ask another person to help. (may do activate ignition on, prompt not to begin engine)

 

QUESTION- Tell me how you would verify that the headlights & tail lgts are working. (No do exit vehicle)

ANSWER – Rationalization: Run switch turn on ignition if vital), after that walk round the automobile. (As this is a “Inform Me” question, there is no want actually check the lgts.)

 

QUESTION -Show me how you switch your headlight from dipped to major beam and explain how you would realize the principal beam is on while within the car

ANSWER- Operate button (with ignition or engine on if required), examine with primary beam alerting light on dashboard

 

QUESTION- Inform me how you would know if there was a trouble with your anti lock braking system

ANSWER- Warning light could illuminate if there is a fault with the anti lock braking system

 

More Information About This Topic As Well A Wide Range Of Chinese Translated Study Material Is Available From Our Websitewww.Successfuldriver.com

This includes the best selling titles;

Driving Theory Test Chinese Translation Interactive ALL 3 Tests In One Product

Hazard Perception Test Chinese Translation

Highway Code Chinese Translation

Driving Practical Test Video Tutorials Including All Show Me, Tell Me Videos In Full Chinese Audio / Video Voice Over